Standard Product in Western Australia to Suit ‘Rail In’/‘C-Type Rail’ Ladders
Product Number: CPCT (Width) (Finish) eg CPCT150S Product Standard Length: 3.0 metres. Product Peak: 15 Degree Covers are common for NEMA 2, NEMA 3 and NEMA 4 in steel and stainless steel. They are also common for NEMA 2 and NEMA 3 in aluminium.
Pre-Galvanised/Hot Dip Galvanised/Stainless Steel suit NEMA 2, NEMA 3 and NEMA 4 Nominal Width 150 mm – Internal Width 155 mm – Product # CPCT150G/H/S Nominal Width 300 mm – Internal Width 305 mm – Product # CPCT300G/H/S Nominal Width 450 mm – Internal Width 455 mm – Product # CPCT450G/H/S Nominal Width 600 mm – Internal Width 605 mm – Product # CPCT600G/H/S Nominal Width 900 mm – Internal Width 905 mm – Product # CPCT900G/H/S Finish product with G or H or S to select product finish.
Aluminium to suit NEMA 4 Nominal Width 150 mm – Internal Width 157 mm – Product # CPCT150A Nominal Width 300 mm – Internal Width 307 mm – Product # CPCT300A Nominal Width 450 mm – Internal Width 457 mm – Product # CPCT450A Nominal Width 600 mm – Internal Width 607 mm – Product # CPCT600A Nominal Width 900 mm – Internal Width 907 mm – Product # CPCT900A
Notes – Hot Dip Galvanised, Stainless Steel & Aluminium Cable Ladder Covers are manufactured against firm orders only and are non returnable. – Hot Dip Galvanising is not recommended for products such as these. Varying degrees of product distortion are likely to occur which may compromise aesthetics. – Powder coating and special finishes on request against firm orders only and are non returnable.